Here’s a new track I wrote last week called Mr. Jones. I’ve actually had the chorus floating around for a few years, but never fleshed it out. I’m glad I finally did!
Year’s End
Well, I had hoped that I’d get back into this fast enough after slipping off to be able to catch up and get to the full 52 posts before year’s end, but clearly that didn’t happen. I do, however, have a handful of projects I’ve done but haven’t yet posted, so I’ll have a few more before then. Either way, I’ll be continuing on with Weekly Creations into the new year.
This week I’m going to show you how to make the sound absorption acoustical panels I made for the studio a few months ago and wrote about in this post, which elaborates on the use and effectiveness of such panels.
I now have a small side business making these panels for others, using industry standard materials that look and perform beautifully. But today I’m going to give a tutorial on how to use less expensive materials in a way that will allow you to make some panels for yourself that still look great and are just as effective for controlling sound as the pro panels, at roughly half the price.
Now of course, professional panels are constructed well, are easy to install, and always come out looking top-notch because they’re made by people who with experience and with materials and processes that are paid for in bulk. But in all reality, they are fairly simple to build. So if you’re a little handy, have extra time and want to save a couple bucks, here’s how you do it!
And if you’d prefer, you can easily purchase professionally made panels at a guaranteed low price from the Inity Acoustics website.
Tools and Materials
First, let’s look at the necessary tools and materials. The tools you’ll need are fairly standard. Of course, if you have better tools you can save yourself a lot of time with some steps. But I’ll show you how to make these using tools many people already have at their disposal.
Tools:
Miter or Circular Saw (or you can likely have your wood cut where you purchase it)
I’m going to list the materials needed to make 8 panels. I picked 8 because the sound absorption insulation I’m recommending comes in packages of 8. Here’s what you need.
Sound absorption core material. Recommended: Roxul Safe’n’Sound (3″ thick, 2’x4′ for wood studs, 24″ on center) – 1 package of 8 (Other options listed below. Compare noise reduction coefficients of various materials here.)
1/4″ sheets of plywood (4’x8′) – 2 sheets – get these cut to 2’x4′ pieces at the store (or have them cut 1/16″ less than 2′ width to compensate for saw blade thickness)
If you have a nailer, replace the screws and finishing nails with 1 package of brad nails (1″)
Hanging Hardware – Options include D Rings with Picture Hooks, Z-clips, or other picture hangers.
Sound Absorption Core Material
There are other options you can use for this. There’s a material known as Owens Corning 703, that has a history of use in many studios around the world. It is the name brand for this kind of thing. Over the years, many companies have developed similar products, and pricing has become far more competitive. The acoustical properties for the Roxul material is nearly identical to Owens Corning products, but at a low fraction of the cost. If Roxul Safe & Sound is not available at your local building supplies outlet, there are a few other options. Here’s a list of some materials, and their approximate pricing:
Roxul Safe’n’Sound – 3″ thick – $0.69/sqft
Roxul RHT 80 – 2″ thick – $1.24/sqft (may be able to find it for less)
Owens Corning 703 – 2″ thick – $2.13/sqft (difficult to find in Canada)
Here’s a great site for comparing the sound absorption coefficients (the amount of sound absorbed at particular frequencies). You can see that these products have roughly the same effectiveness in absorbing sound over multiple frequencies. The Roxul Safe’n’Sound is definitely the best bang for your buck, and you can find it any Home Depot. Can’t go wrong! If you can’t get it as easily where you are located, you should be able to find one of the other options listed above.
Fabric
The higher end industry standard for this is Guilford and Maine acoustical fabrics. However, there are multiple potential fabrics to use for this application – but you can’t use just anything. It doesn’t need to be acoustically transparent, but it’s important to find a fabric that isn’t acoustically reflective. Absorptive fabrics (like felts) are okay.
The easiest (and generally least expensive) to use is burlap or jute, which both tend to have large enough holes between the threads to let the sound in, but not too large as to allow the fibers of the core material out. You can also use various cotton or polyester fabrics. Some say that if you can blow air through the fabric without too much resistance then you have a decent fabric for this application. You can use thicker fabrics, and they’re especially good for durability, but I’d just suggest not going for anything too thick unless it has thicker/textured threads (and thus appropriate spacing between them).
If you can take a good look at existing acoustical treatment somewhere, check the look and feel of the fabrics they use. If not, just use your better judgement. Be sure to get fabric that’s off a bolt at least 56″ wide (and preferably a little larger), so that you can wrap that around the 48″ length of your panel. Anything smaller and you’ll have to buy twice as much fabric!
(Commercial applications require panels that are up to fire code. Failing that, you may have problems with insurance. If you’re putting panels in a commercial location, do a little research on that before hand, and be sure you get appropriate fabric for that application.) Okay then, let’s get down to it!
Step 1: Prepare Your Materials
Use your miter or circular saw to cut the framing lumber to the right sizes (or have it cut where you purchased it). I’m going to assume you’re using the Roxul Safe’n’Sound, which is actually 47″ x 23″, so I’ll give cuts that suite that size. You’ll want the outside of the frame to be exactly 2’x4′. With the thickness of the frame at 3/4″, that’ll put the inside of the frame at 22.5″ x 46.5″. Don’t worry, the Roxul will squish quite nicely into the frame for a snug fit.
The edges of your frame will connect in a butt joint. Cut 16 pieces at exactly 24″, and another 16 pieces at 46.5″. When you account for the thickness of your saw blade, you won’t be able to get four short pieces out of your 8′ piece, so alternate. You’ll get two full panels worth out of every three 8′ pieces. Smell the pieces of lumber. Doesn’t freshly cut pine smell awesome!?!
Cut your fabric into 1 yard pieces. If you purchased exactly 8 yards, you may want to cut at 34″ instead of 1 yard to compensate for less than perfect cuts. 34″ will be more than enough. Your plywood should already be cut to 2’x4′ pieces before you leave your builder’s supplies outlet.
Recap
Take your framing lumber and cut 16 pieces at exactly 24″, and another 16 pieces at 46.5″.
Smell the freshly cut lumber (because it smells awesome).
Cut your fabric at 34″ (assuming it’s from a 56″ or larger bolt of fabric). 8 pieces.
Have your plywood cut at the builder’s supplies outlet into 2’x4′ pieces. 8 pieces.
Step 2: Build Your Frame
Line up the wood for your first frame. If you do not have a brad nailer, pre-drill a hole for 1 screw at each joint. Pre-drilling is crucial to keep everything aligned and prevent splitting. Apply the glue and screw the frame together. Keep in mind, the screw is only there to hold the frame together until the glue dries. The glue will form a much tighter bond than a screw could.
Apply a bead of glue all the way around the face of the frame and put a plywood backing on it. You may have to shimmy the frame a little if it’s a bit of a rhomboid. It probably won’t be perfectly rectangular until you adjust it. Now drive some nails through the ply into the frame. Don’t skimp on the nails.
Recap
Line the pieces for the frame up in preparation for assembly.
Pre-drill a hole for one screw at each corner (going through the 24″ piece into the end of the 46.5″ piece).
Apply glue to the ends and screw each corner together.
Put a bead of glue all the way around the part of the frame facing up.
Put the plywood backing onto the frame and use it’s shape to straighten the shape of the frame.
Nail the backing into place.
Step 3: Wrap The Frame In Fabric
Insert the core material into the frame. If you purchased spray adhesive, coat the center of the inside of the back panel with some adhesive first, and the edges of the core material if you desire. Put on some gloves before handling the core material. Roxul is a rockwool, which is essentially fiberglass. It’s not a health hazard, but it’s definitely an irritant. Wear long sleeves too, and wash you hands with cold water afterwards. Cold water keeps your pores closed while you remove any fibers that may be on your skin.
Once the Roxul is in the frame, set it aside and lay a piece of fabric down on your work surface. Place the frame face down onto the fabric, leaving even amounts of fabric on each side. The best way to wrap a panel is like how you wrap canvas for a painting. To ensure it’s tight and even, start from the center of each side and work your way to the corners, pulling tighter as you get closer to the corner. Staple the fabric down at the back. Don’t skimp on the staples. Every 3 inches or so should do the trick.
Recap
Put on gloves before handling rockwool core material.
Apply spray adhesive to the center of the inside of the back panel, and to the edges of the core material.
Put core material into frame and set aside.
Lay out a cut piece of fabric (34″ x 56″+).
Place the frame with core material face down in the center of the fabric.
Wrap the fabric around one of the long sides first. Start by stapling it into the plywood in the center of that side.
Stretch the fabric from the stapled center toward one of the corners on that side (so that it is being stretched lengthwise on that side) and staple the stretched fabric every few inches. Do the same again from the center to the other corner on that side of the panel.
Then do the opposite side, starting with the center, and this time making sure you pull the fabric tight across the width of the panel. As you stretch the fabric toward the corners, make sure you are stretching both length and width.
Do the same process with the short sides, taking care to fold the corners neatly.
Step 4: Choose Placement
For placement, there are numerous techniques and every room and application is different. For the best and simplest rule of thumb in a home theater or control room environment, you’ll get great results placing them at first reflection points from your sound source. There’s an easy way to determine these spots.
Sit in the seat you’ll normally listen from, facing as you usually would.
Have a friend place a mirror flat against the wall and slide it around until you can see one of your speakers from your seat without shifting yourself to see try to see it.
Mark that point with a piece of tape.
Do the same for each speaker and each wall and the ceiling.
Place your panels over as many or these spots as possible.
Step 5: Hang Your Panels
Mount your panels using the mounting hardware. Make sure you mount them safely. They’re not too heavy, but you certainly wouldn’t want one falling on you. If you are mounting to the ceiling, be sure to attach appropriate mounting hardware to the sturdier wood of the frame of the panel, instead of just into the plywood backing.
Instead of hanging the panels, another option for studio environments is to attach two panels together with hinges and use them as portable baffles for isolating amplifiers and drums.
Full Recap
If you haven’t watched the video tutorial yet, do that now! Okay, let’s do a full written recap:
Prepare You Materials
Take your framing lumber and cut 16 pieces at exactly 24″, and another 16 pieces at 46.5″.
Smell the freshly cut lumber (because it smells awesome).
Cut your fabric at 34″ (assuming it’s from a 56″ or larger bolt of fabric). 8 pieces.
Have your plywood cut at the builder’s supplies outlet into 2’x4′ pieces. 8 pieces.
Build Your Frame
Line the pieces for the frame up in preparation for assembly.
Pre-drill a hole for one screw at each corner (going through the 24″ piece into the end of the 46.5″ piece).
Apply glue to the ends and screw each corner together.
Put a bead of glue all the way around the part of the frame facing up.
Put the plywood backing onto the frame and use its shape to straighten the shape of the frame.
Nail the backing into place.
Wrap The Frame In Fabric
Put on gloves before handling rockwool core material.
Apply spray adhesive to the center of the inside of the back panel, and to the edges of the core material.
Put core material into frame and set aside.
Lay out a cut piece of fabric (34″ x 56″+).
Place the frame with core material face down in the center of the fabric.
Wrap the fabric around one of the long sides first. Start by stapling it into the plywood in the center of that side.
Stretch the fabric from the stapled center toward one of the corners on that side (so that it is being stretched lengthwise on that side) and staple the stretched fabric every few inches. Do the same again from the center to the other corner on that side of the panel.
Then do the opposite side, starting with the center, and this time making sure you pull the fabric tight across the width of the panel. As you stretch the fabric toward the corners, make sure you are stretching both length and width.
Do the same process with the short sides, taking care to fold the corners neatly.
Choose Placement
Sit in the seat you’ll normally listen from, facing as you usually would.
Have a friend place a mirror flat against the wall and slide it around until you can see one of your speakers from your seat without shifting yourself to see try to see it.
Mark that point with a piece of tape.
Do the same for each speaker and each wall and the ceiling.
Place your panels over as many or these spots as possible.
Hang Your Panels
Hang on the wall or ceiling, being sure to use appropriate hanging hardware for their weight.
If hanging on the ceiling, attach the hanging hardware through the plywood backing and into the actual framing lumber, instead of just the ply backing, which will be less stable on its own.
Instead of hanging the panels, another option for studio environments is to attach two panels together with hinges and use them as portable baffles for isolating amplifiers and drums.
Aaaaaaaaand you’re done!!
Now listen to the results! If you’ve never experienced something like this before, you’ll be surprised at the difference between the sound quality of your room before and after this acoustical treatment. Your favorite audio, whether music or movies, will now sound as it was intended to (i.e. frackin’ awesome!).
I hope you enjoyed this tutorial! Check out our Facebook and Google+ pages, and subscribe to our mailing list to see future Weekly Creations as soon as they’re posted. And keep creative!
(Update: Click here for the full diy sound panel tutorial, or visit InityAcoustics.com for professionally made panels)
For week 12 I took on a little DIY project building sound absorption acoustical panels for the studio. Now, just two weeks later, I have a budding business making these panels for others! And the best part is, I started by borrowing small (really small) amounts of cash and tools. Let me tell ya how it came together.
The Motivation
When it all started I was essentially broke. Glenn was coming in to record some acoustic stuff. He’s a great player, and I really wanted to make sure we got the best sound possible. I didn’t have the sound panels I’d want for this, so I had to solve this problem. I think the best business ideas come out of solving a problem you have, and then providing your solution as a product or service to others. But at the time I wasn’t thinking about business, I was thinking about making a great sounding recording. Plus, I knew the panels would be a great Weekly Creations post. Sticking to this site is definitely great for keeping me motivated to take on and complete projects I might otherwise procrastinate on.
I did a little research into these sound absorption panels. Over the years of focusing on music I’ve also worked a handful of different jobs to make ends meet. One place I worked at several times is a place called Hammerhill Sound Systems where we built sub-woofer cabinets for car stereos. With this cabinet making experience the wood working part of these panels would be like second-nature.
So I decided to make some. I’m still planning to write a tutorial post on making these panels, but this post is about making a business out of them, so the tutorial post will have to wait for now.
Low Budget
Anyway, after a rough year and a particularly slow month, I was broke. But I knew I could make the panels for about $20 a piece, and that Glenn’s studio booking would bring in a couple bucks. So I borrowed $40 to get the materials for two panels. Well, I didn’t realize that (of course) some of my materials would have to be bought in higher quantities. So I managed to scrap together about $20 in change, and took out the last $20 I had in the bank. The ATM fees put me into overdraft.
The framing lumber, sound insulation materials and adhesives took up my $80, and I still needed fabric. So I borrowed another $20 and a bus pass and headed down to the fabric store to get some burlap to wrap around the panels. Then I borrowed a jigsaw from a buddy who lives down the street and made my first few panels that night in the parking lot behind my place – finishing up in the dark.
To be honest, those first ones sort of looked like they were made in the dark with a handheld jigsaw. But I was quite pleased when I used them to record Glenn and I realized just how much of a difference they made. The money from Glenn’s booking went to pay back the borrowed cash.
Test The Market
Still in need of some cash, the following Monday night I decided to post an ad on Craigslist and Kijiji for the panels I had made, just to see if anyone would be interested. You never know unless you try, right? I made sure I had all my stats about the NRC (noise reduction coefficient) in order and I added a link to the clean sounding recording of Glenn. Other manufacturers charge a minimum of $80 for similar panels, so I priced mine well below them at $60 each or $200 for a set of 4 (despite only having 3 made). Then I went to bed.
The next day I got a call from a marketing professional in Toronto who recently moved into an exceptionally reverberant downtown office. After finding out that I had made the panels personally, he offered to connect me with his custom printed fabric links and potential add my panels to the line of custom printed fabric products he sells online! He asked me to bring in a sample the following evening. I thought to myself “maybe I should make a good one, in daylight, for this guy”.
So I looked up pricing on mitre saws, found one on sale for 70% off at Canadian Tire, borrowed another $80 and made a single, higher quality panel; reusing the fabric from one of the old panels. He loved the panel (except for the beige burlap fabric) and we discussed testing his printed fabrics for their acoustic properties. Being an audio engineer helps with that side of things. Testing changes in what frequencies are reflected and to what degree is easy enough in the studio.
Improved Design, And Busting My Ass
While waiting for the fabric samples, my tax return finally showed up! This was enough to clean up some bills, pay back the borrowed cash and have a couple hundred bucks left over. Couldn’t be better timing, because that same day I got an order for four panels. So I raced to build some more of higher quality, improving on the design and spending that cash on better fabrics and hardware.
I filled that order and used some new pics of improved panels in a new ad. Then more calls came in. And then even more. And I continued to test fabrics and fill orders. I recently filled an order for a film company to use in one of their video editing suites. I busted my ass to add better fabrics to my existing panels in time to show them when they came by to check out what I had the morning after they called. They loved the ones they picked up, and texted me before the weekend to let me know they’d be calling back next week to get more for their other editing suites!
End Result
So in a couple weeks of low-cost testing and improvements, free online ads, word of mouth, a couple favors, and busting my ass a bit, I’ve managed to help out a bunch of people and create a new income stream for myself! It’s still very small, but it’s already profitable and adding a little extra cash to my (formerly overdraft) bank account.
This is the first Weekly Creation that has turned into a viable income stream. The Weekly Creations site certainly isn’t about money-making creations in particular, but it’s definitely nice for one of the projects to turn into something that serve those ends. As I said before, I credit this to two things; a website that motivates me to create and not procrastinate, and the idea of using your skills to solve a simple problem for yourself and then offering to provide that solution for others. It’s easy to connect with and serve customers when you consider yourself one of them.
Who’d have thought that after years of focusing on making a living from making noise, I’d end up making some extra money from reducing noise too. 😀
This week I took on a little DIY project for the studio. I’ve needed some sound absorption acoustical panels for a while now. They can be pretty pricey – anywhere between $60 and $200 per 2′ x 4′ panel – but the materials themselves aren’t nearly that expensive.
So, I made some myself… for under $20 a piece!
Sound absorption panels not only make a huge difference in a studio, but they’re also quite useful in any home theater or media room. We’re all generally used to acoustically untreated rooms, so we don’t even realize what a difference they can make. But when sound bounces off walls before reaching the listener (or microphone, in the case of the studio) it gets muddy. The short delay in the reflected sound causes a subtle echo effect that greatly reduces clarity and distinguishability.
Sound absorption acoustical panels effectively cut the reflections off hard surfaces in the room and leave you with just the clean, direct, unadulterated sound. This is why movie theaters have giant panels on every wall. In a home theater, It’s like combining the clarity of headphones with the power of surround sound speakers!
Glenn Leybourne
In the studio the panels serve to create crisp, clear recordings. I built the panels last night, and today we had a great acoustic player in the studio by the name of Glenn Leybourne. Anything short of the clarity of an environment treated with these panels would be an injustice to Glenn’s great sounding voice and guitar. Give a listen to this!
The panels are pretty simple structurally – made from sound absorption insulation within a wooden frame and wrapped in a sound-transparent fabric (that lets the sound through to be absorbed by the insulation, instead of reflected by the fabric). In my next post I’ll do a little tutorial on how they’re made.
In the meantime, enjoy Glenn’s music, and stay creative!
While I haven’t gotten into some of the creations I hoped to make by now yet, I am kind of enjoying doing there little acoustic tracks. This one is a tune I wrote a few years back called Good Vibes.
I recorded it on my iPhone for convenience sake, so the sound quality is a little less than the others, but it’s still half decent anyway. I always liked this particular song. Let me know what ya think of it!
Coming Projects
I suppose an acoustic version of an old track isn’t as much of a “creation” as it is just a little performance. Admittedly, I only did today’s track as a last minute thing because any of the other creations I could have potentially posted just aren’t quite there yet. I have a few other creations on the go. One is another website that I started at the request of an artist that frequents Inity Studios. You’ll probably see that one next week.
I want to move away from so many web projects and little acoustic performances. At the start of the year I would never have assumed I’d be focusing so much on web stuff with Weekly Creations. I hope to get into a few tech/electronics projects in the coming weeks. I have some great projects in that department that I just need to drop a couple bucks into.
(On a side note: If you or anyone you know has any old electronics, drop me a line! Particularly any old computers or LCD monitors or TVs – preferably working, though items with malfunctions, dead pixels, etc. are still potential useful.)
Aside from the tech and web projects, I also have some quality final recordings and new songs that I’m working on – things of a little bit more substance that I’m looking forward to posting.
Here’s another birthday cover for another incredible musician who died too young. If you know me, you know I’ve always loved Sublime’s music. Although I haven’t jammed on their tunes in a while, I used to play their stuff everyday. I love Sublime!!
A second post for week 6! I’m on top I’m my game this week. 🙂
I wrote this tune at the first sign of summer weather last year, but never took the time to record it. I had the idea in mind with just a simple acoustic thing I put down on my iPhone, but left any work on it for “later”.
Then, earlier this week my neighbor who runs the restaurant downstairs came by with a case of Coronas that a party had requested with their booked but only drank a couple out of. So, this is what happens when you combine a discount case of Coronas and a warm week in February with a guy like me. Looks like summer came early!
Normally I’d give a tune at least a couple days so I can come back to it with fresh ears to finish it off. But this is just a first run demo, and the Weekly Creations vibe is all about wrappin’ it and putting it out there. So, tell me what you think!
It’s rare for someone to be called a “Legend” and society unanimously agrees. John Lennon, Bruce Lee and Bob Marley are three undisputed Legends. None can compare, but we can all pay tribute.
I always love jammin’ on Bob’s tunes. This is one that doesn’t get played much but is just an insanely awesome song. I hope you enjoy it!
Well, like the last couple weeks, I had to put something together last minute! But here it is. I decided this afternoon to do a cover of one of my favorite tracks to play on guitar: Hendrix’s Little Wing. I’ve always wanted to record a version of this tune. It’s always been a huge inspiration. One day I’ll have to take a little time to really make this my own, but for now, I basically just bit Stevie Ray Vaughan’s styling (and some of his licks to boot!).
The backing track I played over was created by a YouTube user (http://www.youtube.com/watch?v=3uE0DbTvQII). I made plenty of mistakes – it’s far from perfect – but I’ve been having a blast jamming on this track occasionally over the years, so it was a lot of fun taking the time to record it today. I hope you enjoy it half as much as I enjoyed recording it! One day I’ll play it reggae style. 🙂
